| 
T-1 321 / T-1 360
T-1 321 and T-1 360 are quenched & tempered through hardened
wear resistant grades of steel used for impact and abrasion.
T-1 321 and T-1 360 have a minimum brinell of 321 and 360
respectively. It is important to note that Chapel Steel recommends
that this grade not be used in any structural applications.
Mechanical Properties:
Tensile: 152-200
ksi TYPICAL – NOT INTENDED FOR STRUCTURAL USE
Yield: 130-140 ksi TYPICAL – NOT INTENDED
FOR STRUCTURAL USE
Elongation: 15% IN 8”
Brinell: 321 min on T-1 321 and 360 min on
T-1 360
| Stock Sizes |
| Grade |
Gauge (Inches) |
Width (Inches) |
Length (Inches) |
| T-1 321 / T-1 360 |
0.1875 |
96 |
240 |
| T-1 321 / T-1 360 |
0.2500 |
96 |
240 |
| T-1 321 / T-1 360 |
0.3125 |
96 |
240 |
| T-1 321 / T-1 360 |
0.3750 |
96 |
240 |
| T-1 321 / T-1 360 |
0.5000 |
96 |
240 |
| T-1 321 / T-1 360 |
0.6250 |
96 |
240 |
| T-1 321 / T-1 360 |
0.7500 |
96 |
240 |
| T-1 321 / T-1 360 |
0.8750 |
96 |
240 |
| T-1 321 / T-1 360 |
1.0000 |
96 |
240 |
| T-1 321 / T-1 360 |
1.1250 |
96 |
240 |
| T-1 321 / T-1 360 |
1.2500 |
96 |
240 |
| T-1 321 / T-1 360 |
1.5000 |
96 |
240 |
| T-1 321 / T-1 360 |
1.7500 |
96 |
240 |
| T-1 321 / T-1 360 |
2.0000 |
96 |
240 |
| T-1 321 / T-1 360 |
2.2500 |
96 |
240 |
| T-1 321 / T-1 360 |
2.5000 |
96 |
240 |
|
